Enviro Liner® 4000 series of geomembranes

The Enviro Liner® 4000 series is a specialized polyethylene lining material that combines flexibility, UV stability, and chemical resistance. The Enviro Liner® 4000 series was originally designed as a flexible cap material for landfills. It's good flexibility allows it to accommodate differential settlement in landfill cap applications. This flexibility also allows it to be prefabricated (welded, folded and rolled) so that many jobs can be lined using a one-piece liner.

The Enviro Liner® 4000 series is manufactured by Layfield. Each step in the production of your liner panel, from the geomembrane production, to fabrication into a custom panel, is governed and directed by EPI's quality control system. The resulting process is professionally designed to ensure your geomembrane meets specified properties, and performs to the highest possible standards in the field.

The Enviro Liner® 4000 series is ideally suited to small, exposed ponds, or for liquid or effluent containment. The Enviro Liner® 4000 series is excellent for use in backfilled water ponds, run-off collection ponds, channels, and other water and waste water containment applications. The Enviro Liner® 4000 series is UV stabilized with the addition of carbon black and is suitable for exposed use in a number of applications.

Please note that the the EnviroLiner® 4000 series is not available in Canada.

 

6 Jan 2005 Enviro Liner® 4000 Minimum Properties Style ASTM Enviro Liner® 4020 Enviro Liner® 4030 Enviro Liner® 4040 Thickness (Minimum Average) D5199 20 mil 0.5 mm 30 mil 0.75 mm 40 mil 1.0 mm Thickness (Lowest Individual) D5199 -10% -10% -10% Density (Max) D792 0.939 0.939 0.939 Tensile Strength at Break D638 Type IV 76 ppi 13.3 N/mm 114 ppi 20.0 N/mm 152 ppi 26.6 N/mm Elongation D638 800% 800% 800% Tear Resistance D1004 11 lbs 49 N 16 lbs 71 N 22 lbs 98 N Puncture Resistance D4833 32 lbs 142 N 48 lbs 213 N 61 lbs 271 N Carbon Black Content D1603 2.0-3.0% 2.0-3.0% 2.0-3.0% Low Temperature Impact Resistance D746 -69°F -56°C -69°F -56°C -69°F -56°C

5 Jan 2005 Enviro Liner® 4000 Minimum Shop Seam Strengths Style ASTM Enviro Liner® 4020 Enviro Liner® 4030 Enviro Liner® 4040 Heat Bonded Seam Strength D6392 25.4 mm (1") Strip 35 ppi 6.1 N/mm 48 ppi 8.4 N/mm 68 ppi 11.9 N/mm Heat Bonded Peel Adhesion Strength D6392 25.4 mm (1") Strip FTB 28 ppi 4.9 N/mm FTB 43 ppi 7.4 N/mm FTB 58 ppi 10.2 N/mm

6 Jan 2005 Enviro Liner® 4000 Minimum Field Seam Strengths Style ASTM Enviro Liner® 4020 Enviro Liner® 4030 Enviro Liner® 4040 Heat Bonded Seam Strength D6392 25.4 mm (1") Strip 28 ppi 4.9 N/mm 43 ppi 7.5 N/mm 58 ppi 10.2 N/mm Heat Bonded Peel Adhesion Strength D6392 25.4 mm (1") Strip FTB 24 ppi 4.2 N/mm FTB 38 ppi 6.7 N/mm FTB 51 ppi 8.9 N/mm

Enviro Liner® 4000 Fabrication Sizes Material Style 2500 lb Panel size 1200 kg 4000 lb Panel size 1800 kg Enviro Liner® 4020 20 mil (0.50 mm) 25,000 ft2 2,300 m2 40,000 ft2 3,700 m2 Enviro Liner® 4030 30 mil (0.75 mm) 17,000 ft2 1,600 m2 27,000 ft2 2,500 m2 Enviro Liner® 4040 40 mil (1.0 mm) 12,500 ft2 1,200 m2 20,000 ft2 1,900 m2 Each and every liner panel we produce is a custom panel. The way we set up our shop is unique in that our shop welders produce prefabricated panels to best match your containment area. We size each panel to fit, without waste, in a logical sequence in your containment area. In containments with irregular shapes we size our panels to best accommodate the irregular size. There are no theoretical limits to the size of the liner panels that we can prefabricate but there are some practical limits, notably panel weight. Panel weight is important because of the limits of handling equipment that will be available in the field. EnviroLiner is normally limited to a maximum panel weight of 2,500 lbs (1,200 kg); however, if a skilled installation crew is available then a panel of up to 4,000 lbs (1,800 kg) is possible. Panels are accordion folded in one direction and then rolled in the other direction. Unfolding instructions and dimensions are marked on the individual liner panel. Each panel is wrapped in an opaque, weather resistant covering suitable for shipment and storage. All shop fabricated seams are 100% visually inspected by the welding operator. Every panel is tested for Film Tear Bond and destructively tested in peel and shear. Quality control reports are available with each panel produced.