| Certified Properties |
Test Method |
Requirement |
| Thickness ±5% |
ASTM D 5199 |
.050" |
| Tensile - lb. force/in. width, min. |
ASTM D 882 |
116 |
| Elongation at Break (%, min.) |
ASTM D 882 |
430 |
| 100% Modulus - lb. force/in. width, min. |
ASTM D 882 |
50 |
| Tear Strength (lb./in., min.) |
ASTM D 1004 |
13.0 |
| Dimensional Stability (% change max.) |
ASTM D 1204 |
3 |
| Low Temp Impact (°C) |
ASTM D 1790 |
-29 |
|
|
|
| Index Properties |
|
|
| Specific Gravity (min.) |
ASTM D 792 |
1.20 |
| Water Extraction (%, max.) |
ASTM D 1239 |
0.20 |
| Volatile Loss (%, max.) |
ASTM D 1203(A) |
0.50 |
| Resistance to Soil Burial (% change max.) |
ASTM G 160 |
|
| 1. Breaking Factor |
|
5 |
| 2. Elongation at Break |
|
20 |
| 3. Modulus at 100% Elongation |
|
20 |
| Hydrostatic Resistance (psi, min.) |
ASTM D 751(A) |
150 |
| Plasticizer Min. Ave. Molecular Weight |
ASTM D 2124 |
400 |
|
| Minimum Specifications for EPI Factory Fabricated Seams: |
| Peel Strength, lbs/in. width |
ASTM
D 7408 |
15 |
| Shear Strength, lbs/in. width |
ASTM
D 7408 |
96.0 |
.jpg)