Adhesive Seaming

 

 

EPI also offers a modified contact adhesive for seaming PVC geomembrane. This type of adhesive is commonly referred to as a Bodied Adhesive or Bodied Solvent.

 

  1. Apply one coat to each surface. Application should be made to bond coated surface to coated surface, using roller pressure to mate the surfaces.


     
  2. Apply adhesive to both sheets with brush. Although the material may be bonded while wet, optimal results are actually achieved when waiting 3-5 minutes before bonding the surfaces together. Allow the adhesive to become tacky.


     
  3. As with any product, the bodied solvent adhesive should be field-tested on substrate specimens under actual working conditions to guarantee the development of maximum bond values.


     
  4. Roll seam to complete adhesion.

 

 

For more information, call 800-OK-LINER today!