EPI can provide a modified contact adhesive for seaming PVC geomembrane. This adhesive type is commonly called a Bodied Adhesive or Bodied Solvent.
Apply one coat to each surface. Application should be made bonding coated surface to coated surface using roller pressure to mate the surfaces. Apply adhesive to both sheets.Although the material may be bonded while wet, optimum results are achieved when waiting 3 to 5 minutes before bonding the surfaces together. Allow adhesive to TACK.
As with all products, the bodied solvent adhesive should be field tested on specimens of substrate under actual working conditions to guarantee the development of maximum bond values.
Roll seam to complete seam.
For more information, see our Quality Control Manual, or contact EPI at 1-800-OK-LINER.