50 Mil PVC Specification

Click here for PDF version
 

Certified Properties: Test Method: Requirement:
Thickness ±5% ASTM D 5199 .050"
Tensile - lb. force/in. width, min. ASTM D 882 116
Elongation at Break (%, min.) ASTM D 882 430
100% Modulus - lb. force/in. width, min. ASTM D 882 50
Tear Strength (lb./in., min.) ASTM D 1004 13
Dimensional Stability (% change max.) ASTM D 1204 3
Impact Cold Crack (°C) ASTM D 1790 -29
     
Index Properties:    
Specific Gravity (min.) ASTM D 792 1.20
Water Extraction (%, max.) ASTM D 1239 0.20
Volatile Loss (%, max.) ASTM D 1203(A) 0.50
Resistance to Soil Burial (% change max.) ASTM G 160  
1. Breaking Factor   5
2. Elongation at Break   20
3. Modulus at 100% Elongation   20
Hydrostatic Resistance (psi, min.) ASTM D 751(A) 150
Plasticizer Min. Ave. Molecular Weight ASTM D 2124 400
 
Minimum Specifications for EPI Factory Fabricated Seams:
Peel Strength, lbs/in. width ASTM D 882 15
Shear Strength, lbs/in. width ASTM D 882 96

 

For more information call 800-OK-LINER today!